Digiplex EVO641R Installationshandbuch PDF herunterladen (Seite 45)

Modules Programming Guide - 45

4-zone Expansion Module (APR3-ZX4)

One-zone Expansion Module (DGP2-ZX1)

Connect the detection devices to the APR3-

ZX4 input terminals exactly as shown in the

control panel Programming Guide.

A "Locate" request coming from the

control panel can be disabled by pressing

the "Disable Locate" switch.

Extern

Anti-

Tampe

Input terminal Z4 can be used

as an anti-tamper switch input

Option [1]: Section [001].

Refer to Module Connection

Drawings on page 39 for information.

For information on the 4-zone Hardwire

Module’s LEDs, refer to Module LED

Indications on page 39.

Anti-Tamper Switch

Pressing the anti-tamper switch can also be used

to disengage “Locate”.

N.C., With EOL

Refer to the appropriate control panel Reference

& Installation Manual for additional configurations.

The DGP2-ZX1 follows the ATZ and EOL

definitions set in the control panel.

Standard

Detector

Refer to Module Connection Drawings

on page 39 for information.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 59 60

Keine Kommentare

Digiplex EVO641R Installationshandbuch Seite 45