Digiplex EVO641R Installationshandbuch PDF herunterladen (Seite 2)

Table of Contents

Modules Programming Guide................................................................................................................ 4

Grafica Graphic LCD Keypad Module .................................................................................................. 5

32-Character Blue LCD Keypad Module .............................................................................................. 7

48-Zone LED Keypad Module ............................................................................................................ 11

Annunciator Module............................................................................................................................ 13

Motion Detector Modules.................................................................................................................... 14

Outdoor High-Security Digital Motion Detector Modules .................................................................... 15

360° Ceiling Mounted Motion Detector Module .................................................................................. 16

Digital Glassbreak Detector................................................................................................................ 17

1-zone Expansion Module .................................................................................................................. 18

4-zone Expansion Module .................................................................................................................. 19

8-zone Expansion Module .................................................................................................................. 20

Magellan Wireless Expansion Module.............................................................................................

... 21

Listen-in Module ................................................................................................................................. 23

DGP-ACM12....................................................................................................................................... 26

4-PGM Expansion Module.................................................................................................................. 28

Voice Assisted Arm/Disarm Module ................................................................................................... 29

Integration Module.............................................................................................................................. 30

Plug-In Voice Dialer............................................................................................................................ 34

Module Connection Drawings............................................................................................................. 35

Appendix 1: Programming PGMs ....................................................................................................... 46

Entering Programming Mode

This programming guide should be used in conjunction with each module’s Reference & Installation Manual which can be downloaded

from our website at paradox.com. Use this guide to record the settings programmed for these modules.

Use any keypad connected to the combus to access the programming mode.

1) Press and hold the [0] key.

2) Enter your [

INSTALLER CODE].

3) Key in section [4003] (EVO)

4) Enter the module’s [

SERIAL NUMBER]

5) Enter the required [

DATA].

Feature Select Programming:

Some of the modules’ sections are programmed by enabling or disabling options. Numbers [1] to [8] represent a specific option within the

sections. Press the button corresponding to the desired option. The selected digit will appear on the LCD screen. This means that the

option is enabled. Press the key again to remove the digit from the display thereby disabling the option. Press the [

ENTER] button when the

desired options are set.

Decimal Programming:

Some module sections require that a decimal value be entered. E.g.: A PGM Timer will require a 3-digit time to be entered. With this

method, any 3-digit number from 000 to 255 can be entered.

Level Programming:

Some module sections are programmed using “Level Programming”. In this section only one option can be enabled. To enable the option,

use the and buttons until the option you want is illuminated, then press the [

ENTER] button to set the option.

Programming modules using other methods:

WinLoad:

The modules can be programmed at 38,400 baud by connecting locally using a 307USB adapter or remotely through a modem.

Modules Broadcast Feature:

Copy the contents of all programming sections from one module to one or more modules of the same type. To enter the programming

mode, key in section [4004]. Enter the serial number of the source module, followed by the serial numbers of the modules you wish to

program. To begin transferring data, press [

ACC] on LCD keypads or the center action key (Start) on Grafica keypads.

1 2 3 4 5 6 7 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Digiplex EVO641R Installationshandbuch Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Digiplex EVO641R