Digiplex EVO641R Installationshandbuch PDF herunterladen (Seite 47)

Modules Programming Guide - 47

Intergration module (APR-PRT3)

1) LED feedback

2) 25-Pin Parallel Port: Connect the Printer Module’s 25-pin parallel port to any dot matrix printer.

Note: The dot matrix printer must support a minimum of 80 columns.

3) 9-Pin Serial Port: Connect the Printer Module’s 9-Pin serial port to a dot matrix printer.

Note: The dot matrix printer must support a minimum of 80 columns.

4) 9-pin Serial Port: Connect the Printer Module’s 9-pin serial port to a home automation module.

5) 9-pin Serial Port: Connect C-Bus to the Printer Module using a null modem cable.

6) 9-pin Serial Port: Connect either the Printer Module’s USB or 9-pin serial port to a computer’s COM port to view the control panel’s

events on the computer’s

monitor. The events display on the monitor can then be printed through the printer connected to the computer.

Refer to Module Connection Drawings on page 39 for

information.

For information on the Printer

Module’s LEDs, refer to Module LED

Indications on page 39.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 59 60

Keine Kommentare

Digiplex EVO641R Installationshandbuch Seite 47