Digiplex EVO641R Betriebsanleitung PDF herunterladen (Seite 5)

LCD Keypad 5

2. 2 CON FIDEN TIAL MODE

Your Installer can program keypads to not display the status of your system automa tically by chang ing the LCD

scree n to Confidential Mode. In Confidential Mode:

• The zones and status messages will NOT be displayed

• The indicator lights will NOT illuminate

• Depending on how your keypad was programmed by your installer, you must either press a button or enter your User

Access Code to illuminate the indicator lights and activate Normal Mode.

2.3 PARTITIONED SYSTEM

A sepa rated system is called a Partitione d S ystem, which can be useful in situation s where shared security systems

are more practi ca l. Your installer can design your system to re cognize up to four separate pro tected areas. For

exa mple, a company that h as both an office area and a wareh ouse area can arm and disarm each a rea separately

and control the access to each area .

If you ha ve access to mor e than one a rea, an d you need to sele ct a specific area(s) when pro mpted by you r LCD

keypa d, follow either one of the follo wing three method s to make your selectio n:

• Press the keypad button corresponding to the area you wish to select (i.e. 1, 2,...4).

• Press the

[0]

button for all areas.

• Use the

[

]

and

[

]

buttons, and press

[

ENTER

]

when the area you want to select appears on the scre en.

2.4 AREA STATUS DISPLAY

In Area Status Di sp lay mode, the follo wi ng information will scroll on the LCD scree n:

• “read y”: if all zones in the selected area are closed.

• “not ready”: if zones in the selected area are open.

• open zones within that area (i.e. “Front Door Open”).

• “Trouble(s)”: (section 7.0 on page 14) if a trouble has occurred.

• “Alarms in Memory”: (section 4.3 on page 8) if an alarm has occurred.

• “Armed” ; “Force Armed” ; “Instant Armed” ; “Stay Armed”: displays the arming status of the selected area.

3.0 ARMING

Wh en your system is armed, it can re sp ond to any bre ach in th e protected zones by causing an a larm and sending

a re port to your Central Monitorin g Station.

3.1 EXIT DELAY TIMER

Wh en you arm your system, it will trigger the E xit Delay Timer to provid e yo u with enoug h time to exit the protected

area before the system is armed.

3. 2 REG UL AR AR MING

The Area Status Display

allows you to view the status

of the selecte d areas in a

Partitioned System (Refer to

section 2.3 on pa ge 5).

How do I see the status of the a reas?

1) En ter you r [

AC CESS CODE], then press the [1] bu tton.

2) Press the button correspo nding to the area (i.e . 1, 2,...4), or use the [S

S ] and

T ] buttons and press [

ENTER] when the a rea you want to view ap pears on

the screen.

3) Pre ss [CLEAR] to exit.

This method is used for the

eve ryday a rming of your

system. All zones within the

protected are a must be

close d to Regula r arm the

system.

How do I Regular arm the s ystem?

1) En ter you r [

AC CESS CODE].

2) Press the [ARM] button.

3) If you ha ve access to more than o ne area, se lect the area(s) you wish to

Regular arm (refer to section 2.3 on page 5).

1 2 3 4 5 6 7 8 9 10 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Digiplex EVO641R Betriebsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Digiplex EVO641R