Digiplex DGP2-641BL Installationshandbuch PDF herunterladen (Seite 32)

32 - Digiplex Modules Programming Guide

LCD Keypad Module (DGP2-641/BL/R/RB) 48-Zone LED Keypad Module (DGP2-648)

LCD Keypad (DGP2-641/BL/R/RB)

Memory Key Connector

To Digiplex

control panel

(DGP-848 or

DGP-NE96)

Please Note: The keypad’s

anti-tamper switch will

communicate its status to the

control panel via the combus.

* The keypad’s zone

follows the control

panel’s EOL definition.

The zone speed is set at

600mS and cannot be

programmed.

Door Contact

Combus

To Digiplex

control panel

(DGP-848 or

DGP-NE96)

LED Keypad (DGP2-648)

Please Note: The keypad’s

anti-tamper switch will

communicate its status to the

control panel via the combus.

* The keypad’s zone

follows the control

panel’s EOL definition.

The zone speed is set at

600mS and cannot be

programmed.

Door Contact

Combus

DGP2-641R/RB Access Control Connections

DGP2-641R DGP2-641R

Fused external power

supply (recommended)

Door Lock

IN4007

Diode

DGP2-641R

Paradoor (460)

Request to Exit device.

Must be connected to

terminal.

If a door contact is not being used, install a

jumper or a 1k

resistor across the BLK and Z1

terminals depending on the control panel’s EOL

definition.

If the REX (Request for Exit) device is not being

used, place a jumper across the

BLK and Z2

terminals.

Door Contact

Must be connected

Z1 terminal.

* Follows control panel’s EOL definition.

No EOL

required for

Z2.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Digiplex DGP2-641BL Installationshandbuch Seite 32

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Digiplex DGP2-641BL