Digiplex DGP2-641R Installationshandbuch PDF herunterladen (Seite 21)

Digiplex/DigiplexNE LCD Keypad 19n

4.13 NETWORK VOLTMETER

The Network Voltmeter provides a real-time display of the voltage so

you can verify if the network is supplying sufficient power at the

keypad’s location. The readings will appear on the LCD screen. A

reading of 10.5V indicates that the voltage is too low. This may occur

when too many modules are connected to the network, a module is

installed too far from the panel or if the system is running on the

battery. In some cases adding an external power supply may correct

the situation.

Step 1: From Normal Mode press and hold the [0] key.

Step 2: Enter the [

INSTALLER CODE] (by default 000000).

Step 3: Press [

ACC].

The voltage may drop during the control panel battery test.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Keine Kommentare

Digiplex DGP2-641R Installationshandbuch Seite 21