Digiplex DGP-641 Bedienungsanleitung PDF herunterladen (Seite 12)

10 User’s Manual

Options [4], [5], [6], and [7]: Arming with Card

When option [4] is turned ON, the Access Control Card will be

able to arm areas (see section 3.3, p. 19). The arming method is

determined by turning ON or OFF one of the options from [5] to

[7]. Only one arming method can be programmed per card. For

details concerning the arming methods, see the Digiplex LCD

Keypad User’s Manual.

Regular Arming with Access Control Card

Turn option [4] ON and options [5], [6], & [7] OFF.

The Access Control Card can Regular Arm area(s).

Stay Arming with Access Control Card

Turn options [4] and [5] ON and options [6] and [7] OFF.

The Access Control Card can Stay Arm the area(s).

Instant Arming with Access Control Card

Turn options [4] and [6] ON and options [5] and [7] OFF.

The Access Control Card can Instant Arm the area(s).

Force Arming with Access Control Card

Turn options [4] and [7] ON and options [5] and [6] OFF.

The Access Control Card can Force Arm the area(s).

Option [8]: Access to Armed Access Control Doors

When option [8] is turned ON, the Access Control Card can be

used to open an armed Access Control Door. When a valid

Access Control Card is presented to a reader of an Access

Control Door that is assigned to a zone and the zone is armed,

access will be granted and the Entry Delay will begin. When this

option is enabled, extra security is provided since a user must

ACCKEU00.fm Page 10 Wednesday, November 24, 1999 11:05 AM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 40 41

Keine Kommentare

Digiplex DGP-641 Bedienungsanleitung Seite 12